Welcome to our website! As we have the ability to list over one million items on our website (our selection changes all of the time), it is not feasible for a company our size to record and playback the descriptions on every item on our website. However, if you are an American with a disability we are here to help you. Please call our disability services phone line at (540) 786-2777 during regular business hours and one of our kind and friendly personal shoppers will help you navigate through our website, help conduct advanced searches, help you choose the item you are looking for with the specifications you are seeking, read you the specifications of any item and consult with you about the products themselves. There is no charge for the help of this personal shopper for any American with a disability. Finally, your personal shopper will explain our Privacy Policy and Terms of Service, and help you place an order if you so desire.

Phantom 4000W Monoblock, Class D Amplifier Dimensions 15"L 10.31"W 2.25"H

Boss Audio PD4000

This item is currently on display in our gallery!

Features

  • 1 Ohm Stable
  • Class D Amps
  • Multi LED Back Lit
  • Phase Control

Quick Specs

  • Type: Amplifiers
  • Width: 10.31"
  • Height: 2.25"
  • Depth: 15"
  • Energy Star Rated: No

See More

 
Image Feature

1 Ohm Stable

The lowest impedance accepted by this amplifier is 1 ohm. Amplifiers that are 1 ohm stable produce the most power possible from the amp. An amplifier capable of delivering power at a 1 ohm load is usually reserved for serious subwoofers that can handle the power. Please note this particular amp needs a healthy electrical system including a low gauge wire capable of delivering the necessary current.

Image Feature

Class D Amps

Class D is a high speed switching amplifier technology that is more efficient, generates less heat and draws less power than traditional Class A/B amps. We use Class D in our monoblock amplifiers to give you massive amounts of power in a relatively small footprint for clean, powerful, bass.

Image Feature

Multi LED Back Lit

Multiple LED Backlighting gives this Phantom Series Amps an awsome red glow when the amp is turned on.

Image Feature

Phase Control

The phase control feature allows you to adjust the speakers phase to ensure all audio signals are playing together rather than against each other. When bass notes are noticeably absent, a quick and easy adjustment to the phase control could provide the perfect remedy.

Image Feature

Protection

If the amplifier gets too hot, the thermal protection circuit turns the amp off and allows the amp to cool down before turning it back on. If a speaker fails causing an electrical short, the protection circuit will automatically cut the output and remain in that state until the short is resolved. These safety features give you peace of mind knowing the amplifier is constantly monitoring conditions to protect itself.

Image Feature

Strapping Capability

Strapping capability means that two amplifiers can be linked together to create double the power at an impedance of 2 ohms. A benefit of strapping is less electrical current is required than if you ran [2] individual amps at 1 ohm and you only need 1 pair of preamp outputs and [1] RCA cable to connect.

Image Feature

Subsonic Filter

A subsonic filter is designed for use on subwoofers. Since not all subwoofers can reproduce the same low frequencies, the subsonic filter can be set for optimum bass response in order to keep the driver playing efficiently.

Image Feature

Subwoofer Level Control

The ability to boost or attenuate the sub level when an amp and subwoofer are connected to the subwoofer pre-amp output.

Image Feature

Switchable Input Sensitivity

Switchable Input Sensitivity gives you the freedom to connect the amp to any standard source unit and have peace of mind it will be within range to properly match the output of the source unit allowing you to use the volume controls on your source unit the way it was designed.

Image Feature

Variable Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Image Feature

Variable Gain Control

Variable Gain Control lets you balance the amps output with the speakers or subs the amp is driving. To much gain will lead to distortion and to little will lead to clipping.

Image Feature

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

1 Ohm Stable The lowest impedance accepted by this amplifier is 1 ohm. Amplifiers that are 1 ohm stable produce the most power possible from the amp. An amplifier capable of delivering power at a 1 ohm load is usually reserved for serious subwoofers that can handle the power. Please note this particular amp needs a healthy electrical system including a low gauge wire capable of delivering the necessary current.

Class D Amps Class D is a high speed switching amplifier technology that is more efficient, generates less heat and draws less power than traditional Class A/B amps. We use Class D in our monoblock amplifiers to give you massive amounts of power in a relatively small footprint for clean, powerful, bass.

Multi LED Back Lit Multiple LED Backlighting gives this Phantom Series Amps an awsome red glow when the amp is turned on.

Phase Control The phase control feature allows you to adjust the speakers phase to ensure all audio signals are playing together rather than against each other. When bass notes are noticeably absent, a quick and easy adjustment to the phase control could provide the perfect remedy.

Protection If the amplifier gets too hot, the thermal protection circuit turns the amp off and allows the amp to cool down before turning it back on. If a speaker fails causing an electrical short, the protection circuit will automatically cut the output and remain in that state until the short is resolved. These safety features give you peace of mind knowing the amplifier is constantly monitoring conditions to protect itself.

Strapping Capability Strapping capability means that two amplifiers can be linked together to create double the power at an impedance of 2 ohms. A benefit of strapping is less electrical current is required than if you ran [2] individual amps at 1 ohm and you only need 1 pair of preamp outputs and [1] RCA cable to connect.

Subsonic Filter A subsonic filter is designed for use on subwoofers. Since not all subwoofers can reproduce the same low frequencies, the subsonic filter can be set for optimum bass response in order to keep the driver playing efficiently.

Subwoofer Level Control The ability to boost or attenuate the sub level when an amp and subwoofer are connected to the subwoofer pre-amp output.

Switchable Input Sensitivity Switchable Input Sensitivity gives you the freedom to connect the amp to any standard source unit and have peace of mind it will be within range to properly match the output of the source unit allowing you to use the volume controls on your source unit the way it was designed.

Variable Bass Boost Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Variable Gain Control Variable Gain Control lets you balance the amps output with the speakers or subs the amp is driving. To much gain will lead to distortion and to little will lead to clipping.

Variable Low Pass Filter Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Features

  • 1 Ohm Stable
  • Class D Amps
  • Multi LED Back Lit
  • Phase Control
  • Protection
  • Strapping Capability
  • Subsonic Filter
  • Subwoofer Level Control
  • Switchable Input Sensitivity
  • Variable Bass Boost
  • Variable Gain Control
  • Variable Low Pass Filter
General Specs
Channel Configuration 1 Channel
Power Supply Type MOSFET Power Supply
Amp Topology Monoblock, Class D
Performance Specs
Total Power Output 4000 Watts
Peak Power @ 1 4000 Watts x 1
Peak Power @ 2 2000 Watts x 1
Peak Power @ 4 1000 Watts x 1
RMS Power @ 1 3000 Watts x 1
RMS Power @ 2 1500 Watts x 1
RMS Power @ 4 750 Watts x 1
Strapped Power bridged @ 2 8000 Watts
Speaker Impedance 1 to 8
T.H.D. (Total Harmonic Distortion) 0.01 %
S/N Ratio (A-Weighted) 100 dB
Frequency Response 15 Hz to 150 Hz 1 dB
Connections, Controls, and Processing
RCA Inputs 2 Channel
Pre Amp Outputs 2 Channel
Low Pass Filter 50 Hz to 150 Hz
Subsonic Filter 15 Hz to 40 Hz
Bass Boost Variable 0 to 18 dB
Phase Control 0 to 180°
Subwoofer Level Control YES
Input Sensitivity Switch YES
Strappable YES
Thermal/Overload/Short Protection YES
Measurement
Width 10.31"
Height 2.25"
Length 15"

Quick Specs


  • Appearance

  • Type: Amplifiers

  • Dimensions

  • Width: 10.31"
  • Height: 2.25"
  • Depth: 15"

  • Features

  • Energy Star Rated: No

User Manual in English

Get Adobe Reader

* Documents require Adobe Reader.

Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.

Extended warranties are usually very inexpensive and can save you thousands in the future. It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.

Electronics can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new electronics should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.